The storm has devastated many areas in the southern United States. These areas include the coastal districts of Louisiana and Texas, the Florida Keys, Mississippi and southern Florida. Special areas in this ‘storm zone’ include Tampa, St. Petersburgh and Ft. Lauderdale (Florida), Carolina Beach / Wrightsville / Wilmington Beach and Cape Hatteras (North Carolina) and even to the north like Eastern Long Island (New Jersey).
Many homeowners in this area use ‘window cover’ plywood to cover windows and doors during strong winds. These plywood sheets are often nailed or screwed in doors and window openings. Screws will be more advisable as they do the sheet harga mdf removal after the storm is easier than nail secured.
Some hurricane experts recommend that plywood sheets fit the need to attach fitting to the inside edges of the door or window frames. This method works on some types of windows but not all of them.
What to do with plywood sheets after the storm is the concern of many property owners. First, one must mark all the parts for easier relocation to the same spot in the next storm (mark “bathroom window” above the appropriate sheet, of course, the bathroom window). This may be a waste of time, but if the owner has multiple openings of the same size, it can cause confusion, and if the storm warns in a short period of time, confusion about which panel becomes an unwanted feeling.
For some people, they can just remove the panel and store it in the garage or shed in the backyard. But what if they do not own a house with a garage or a shed? They can not allow it to be stacked in the backyard because of the sun, wind and rain to age them and make them curved and unusable. Rodents can be a problem, insects (termites commonly found in some of these areas) can shorten the life of plywood.
One option for this is to wrap it with a standard tarpaulin (tarpaulin) that can be found in most hardware and automotive stores. Rolls of rope and some time can cover them quite adequately, but if not done properly, not long after the wind has managed to untie the rope and your tarps fly around the wind, showing the expensive sheet.
Another option for outside storage of plywood sheets is a polyethylene webbing bag, similar to a large ‘envelope’, but large enough to hold about thirty pieces of 3/4 “x 4 ‘x 8’ plywood.One ends are open and seal with Velcro, so after you shift all the sheets in it, you close the end of Velcro and you have an impermeable storage container for storm protection.
These bags are made of partially recycled plastic and can be reused for many years, so this is a ‘green’ product, a welcome change to the use of a single plastic that ends up in our landfills every year. They are also treated with ultraviolet inhibitors to help prevent damage when stored outside. Hurricane bags are quite affordable and easily folded for storage while plywood protects its structure. Every homeowner who needs this type of storage should pay attention to this type of bag.